8255 PPI DATASHEET PDF

A datasheet, A pdf, A data sheet, datasheet, data sheet, pdf, Intel, PROGRAMMABLE PERIPHERAL INTERFACE. INTEL (Programmable Peripheral Interface). In previous lectures we have discussed how to interface I/O devices with the system bys. If an input device. The Intel (or i) programmable peripheral interface (PPI) chip was developed and manufactured The i was also used with the Intel and Intel and their descendants and found .. “Intel 82c55 PPI Datasheet” (PDF ).

Author: Mazuk Faejora
Country: Andorra
Language: English (Spanish)
Genre: Medical
Published (Last): 4 July 2009
Pages: 305
PDF File Size: 18.48 Mb
ePub File Size: 3.96 Mb
ISBN: 311-2-21412-253-1
Downloads: 57633
Price: Free* [*Free Regsitration Required]
Uploader: Magal

If an input changes while the port is being read then the result may be indeterminate.

The two halves of port C can be either used together as an additional 8-bit port, or they can be used as individual 4-bit ports. The control signal chip select CS pin 6 is used to enable the chip. This mode is selected when D 7 bit of the Control Word Register is 1.

The is a member of the MCS Family of chips, designed by Intel for use with their and microprocessors and their descendants [1].

8255 Programmable Peripheral Interface

For example, if port B and upper port C have to be initialized as input ports and lower port C and port A as output ports all in mode Intel Intel D Port A can be used for bidirectional handshake data transfer. It was later cloned by other manufacturers.

From Wikipedia, the free encyclopedia. When we wish to use port A or port B for handshake strobed input or output operation, we initialise that port in mode 1 port A and port B can be initilalised to operate in different modes, i. Microprocessor And Its Applications. Since the two halves of port C are independent, they may be used such that one-half is initialized as an input port while the other half is initialized as an output port.

Input and Output data are latched.

  BELA BOLLOBAS RANDOM GRAPHS PDF

Some of the pins of port C function 8255 handshake lines. Only port A can be initialized in this mode. The ‘s outputs are latched to hold the last data written to them. Acknowledgement and handshaking signals are provided to maintain proper data flow and synchronisation between the data transmitter and receiver.

Interrupt logic is supported. The is also directly compatible with the Zas well as many Intel processors. For example, if port B and upper port C have to be initialized as input ports and lower port C and port A as output ports all in mode All of these chips were originally available in a pin DIL package.

Interrupt logic is supported. Retrieved from ” https: If from the previous operation, port A is initialized as an output port and if is not reset before using the dahasheet configuration, then there is a possibility of damage dwtasheet either the input device connected or or both, since both and the device connected will be sending out data.

Each line of port C PC 7 – PC 0 can be set or reset by writing a suitable value to the control word register. As an example, if it is needed that PC 5 be set, then in the pppi word.

Address lines A 1 and A 0 allow to access a data register for each port or a control register, as listed below:. As an example, consider an input device connected to at port A. For port B in this mode irrespective of whether is acting as an input port or output portPC0, PC1 and PC2 pins function as handshake lines. By using this site, you agree to the Terms of Use and Privacy Policy.

Only port A can be initialized in this mode. Retrieved 26 July The two modes are selected on the basis of catasheet value present at the D 7 bit of the control word register.

When we wish to use port A or port B for handshake strobed input or output operation, we initialise that port in mode 1 port A and port B can be initilalised to operate in different modes, i. Microprocessor And Its Applications. This page was last edited on 23 Septemberat The Intel or i Programmable Peripheral Interface PPI chip was developed and manufactured by Intel in the first half of the s for the Intel microprocessor.

  KANCHANJUNGA APARTMENT PDF

In this mode, the may be used to extend the system bus to a slave microprocessor or to transfer data bytes to and from a floppy disk controller. This means that data can be input or output on the same eight lines PA0 – PA7. Address lines A 1 and A 0 allow to access a data register for each port or a control register, as listed below:. Acknowledgement and handshaking signals are provided to maintain proper data flow and synchronisation between the data transmitter and receiver.

In this mode, the may be used to extend the system bus to a slave microprocessor or to transfer data bytes to and from a floppy disk controller.

Intel – Wikipedia

For port B in this mode irrespective of whether is acting as an input port or output portPC0, PC1 and PC2 pins function as handshake lines. If from the previous operation, port A is initialized as an output port and if is not reset before using the current configuration, then there is a possibility of damage of either the input device connected or or both, since both and the device connected will be sending out data. The Intel or i programmable peripheral interface PPI chip was developed and manufactured by Intel in the first half of the s datashfet the Intel microprocessor and is a member of the MCS Family of chips.

Posted in Art